CraftWi Foldable Outlet Phone Shelf – Plug-In Charging Shelf, No-Screw Mounting

249.90TL

Made to order Production time: Ships within 1–3 business days

The CraftWi Foldable Outlet Phone Shelf gives your charging phone a tidy spot right below the outlet. No screws, drill or adhesive needed: pass your charger's plug through the hole in the shelf and plug it in, and the charger body holds the plate in place.

How to use

Hold the plate against the outlet with the plug hole centred on the socket.
Plug your charger into the outlet through the plate.
Fold the wing down; it stops at 90°. Lay your phone flat and connect the cable through the exit in the front lip.

Highlights

Charging shelf at the outlet: your phone stays off the floor, the sofa or a dangling cable. Ideal for the kitchen, bedroom, hallway and office.
No screws, holes or adhesive: leaves walls untouched and suits renters. To remove, simply unplug the charger.
Folding wing, locks at 90°: the shelf rests on a stop under the phone's weight. Fold it up when not in use and it becomes a slim 110 × 92 mm plate. The hinge is printed in one piece, with no screws or pins.
Roomy phone area: the 110 × 88 mm surface holds large phones in cases, lying flat. A front lip stops sliding; the cable exit and two cable channels in the plate keep the cable tidy.

Compatibility: chargers with a slim two-pin (Euro type) plug. The charger body must be larger than the plug hole (36 × 17 mm); for example, it works with Apple 20W, Samsung 25W and Xiaomi 33W chargers. Not for bulky grounded (round-bodied) plugs.

Charger, cable and phone not included. The shelf is for phones and similar light items only.

Purchasing information

Shipping

Last updated: October 31, 2026 Thank you for shopping with CraftWi. This policy explains how we ship your order, what it costs, and what to expect after you buy. Order Processing Except as otherwise stated on our website, orders will be processed as soon as...

Read the full policy

Returns and exchanges

You can return products bought from CraftWi within 14 days of the date you receive them, without giving any reason (right of withdrawal). This period is based on Turkish Consumer Protection Law No. 6502 and the Distance Contracts Regulation. For returns within Türkiye, CraftWi pays...

Read the full policy

Product information

Specifications

Dimensions: Open: 110 × 108 × 92 mm · Folded: 110 × 92 × 34 mm (W × D × H)
Weight: Approx. 80 g
Material: PLA bioplastic
Finish: Matte surface, rounded edges
Colors: Matte Black and Matte White
Compatibility: Chargers with a slim two-pin (Euro type) plug, e.g. Apple 20W, Samsung 25W, Xiaomi 33W; phones up to 8.8 cm wide (lying flat). Not for bulky grounded plugs.
Phone area: 110 × 88 mm, lying flat
Wing: Folding, rests on a stop at 90°
Hinge: Printed in one piece, no screws or pins
Plug hole: 36 × 17 mm
Cable management: Cable exit in the front lip, 2 cable channels in the plate
Mounting: No screws; the charger body holds the plate to the outlet
Charger, cable and phone: Not included

Intended use

Holds your charging phone on a flat shelf right below the outlet, so it never sits on the floor, the sofa or a dangling cable. Suits the kitchen, bedroom, hallway and office; ideal for renters because it leaves walls untouched.

Installation and assembly

1. Hold the plate against the outlet with the plug hole centred on the socket.
2. Plug your charger into the outlet through the plug hole; the charger body holds the plate in place.
3. Fold the wing down; it stops at 90°.
4. Lay your phone flat and connect the cable through the exit in the front lip.
To remove, unplug the charger first.

Care and cleaning

Wipe with a slightly damp, soft cloth; do not use solvents or abrasive cleaners.
PLA is heat-sensitive: do not use it above a radiator, next to a stove or in direct sunlight. The shelf is for phones and similar light items only.